EXAIR’s Super Air Wipe is a quiet and efficient solution for your pipe or cable blowoff. They are specifically engineered for drying, cleaning or cooling a variety of extruded shapes. The 360° uniform airflow produced by the Super Air Wipe will be more effective, while using less compressed air than a comparable solution using an array of nozzles. They are also easy to insert into your process due to the split design, allowing you to clamp the Air Wipe around your material without the need for threading.
The Super Air Wipe comes in two different materials – aluminum and stainless steel, with various stock sizes. Our aluminum models are available in sizes from 3/8″ to 11″, and stainless is available from 1/2″ to 4″. As with all EXAIR’s other stock products, these are available for same-day or next-day shipping, and are covered under our 30-day unconditional guarantee. The aluminum models are rated for temperatures of up to 400°F, while the stainless steel are good up to 800F.
We also provide Super Air Wipe Kits to get the most out of your Super Air Wipe. A kit will include the Super Air Wipe itself, a filter, a regulator, and a shim set. The filter will remove bulk liquids and debris from the compressed air to keep performance optimal. The regulator is used to fine-tune the force provided by the Super Air Wipe. This helps to not over-use the amount of compressed air required for the job.
If you need larger adjustments to the force and flow than the regulator can provide, then you can add shims to increase the airflow and force. They are easy to install on the Super Air Wipes to allow for applications to have more cooling, faster drying, and better removal of tough debris. With both the regulator and shim set, you can vary the air velocity from a breeze to blast, so whatever your application requires, the Super Air Wipe will work for you.
If you would like to learn more about our Super Air Wipes, then please give us a call!
Al Wooffitt
Application Engineer
Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_AW
